8BAC0124.000-1 SinCos interface for ACOPOS - B&R Supplier in China

Products Mode: 8BAC0124.000-1
Place of Origin: AT

Inquery Now
8BAC0124.000-1 SinCos interface for ACOPOS
  • SinCos interface for installation in ACOPOSmulti modules
  • Evaluation of incremental encoders with sinusoidal output signal
  • Encoder supply +5 V
  • Connection for limit switches
  • Connection for temperature sensor
ACOPOSmulti plug-in module, SinCos interface
General information
Module type ACOPOSmulti plug-in module
B&R ID code 0x258A
Slot  Slots 1 and 2
Max. power consumption PModule [mW] = 25 V * (IEncoder [mA] * 0.37 + 32 mA)
CE Yes
UL cULus E225616
Power conversion equipment
KC Yes
Encoder connection 
Module-side connection 15-pin male DSUB connector
Status indicators UP/DN LEDs
Electrical isolation  
Encoder - ACOPOSmulti No
Encoder monitoring Yes
Max. encoder cable length 75 m
Encoder inputs
Quantity 1
Sine/Cosine inputs  
Signal transmission Differential signals, symmetrical
Signal frequency (-3 dB) DC up to 300 kHz
Signal frequency (-5 dB) DC up to 400 kHz
Common-mode voltage Max. ±7 V
Terminating resistor 120 Ω
Resolution 12-bit
Encoder power supply
Output voltage 5 V ±5%
Load capacity 300 mA 
Protective measures  
Overload-proof Yes
Short-circuit proof Yes
Sense lines 2, compensation of max. 2x 0.7 V
Reference input
Signal transmission Differential signal, symmetrical
Differential voltage for low ≤-0.2 V
Differential voltage for high ≥+0.2 V
Common-mode voltage Max. ±7 V
Terminating resistor 120 Ω
Resolution @ 1 VSS  Number of encoder lines * 5700
Limit switch inputs 
Quantity 2
Circuit Source
Input resistance 1470 Ω
Electrical isolation  
Input - ACOPOSmulti No
Input - Input No
Input voltage  
Minimum -12 V
Nominal +5 V
Maximum +20 V
Switching threshold  
Low <0.8 V
High >2 V
Switching delay Max. 100 μs
Ambient conditions
Nominal 5 to 40°C
Maximum 55°C
Storage -25 to 55°C
Transport -25 to 70°C
Relative humidity  
Operation 5 to 85%
Storage 5 to 95%
Transport Max. 95% at 40°C