8V1045.00-2 B&R Modular Plug-in Modules - B&R Stock in China

Products Mode: 8V1045.00-2
Place of Origin: AT

B&R Automation offers a wide range of industrial automation products, including PLCs, industrial PCs, I/O modules, drives, motion control systems, and software tools. These products are typically identified by specific model numbers or part numbers that are widely recognized in the automation industry.

Inquery Now
Prev Next
Description
8V1045.00-2 B&R Modular Plug-in Modules - B&R Stock in China
 
MATERIAL NUMBER:
8V1045.00-2
DESCRIPTION:
  • Modular mechanical design using plug-in modules
  • Integrated line filter
  • Integrated braking resistor
  • All connections are made using plug-in connectors
  • Integrated electronic restart inhibit
ACOPOS servo drive, 3x 400-480 V, 4.4 A, 2 kW, integrated line filter, braking resistor and electronic safe restart interlock
 
B&R ID code 0x12C7
Slots for plug-in modules 4
Certifications  
CE Yes
Functional safety Yes
UL cULus E225616
Power conversion equipment
EAC Yes
KC Yes
Mains connection
Permissible network configurations TT, TN 
Mains input voltage 3x 400 VAC to 480 VAC ±10%
3x 230 VAC ±10% 
Frequency 50 / 60 Hz ±4%
Installed load Max. 5 kVA
Inrush current at 400 VAC 7 A
Switch-on interval >10 s
Integrated line filter per EN 61800-3, category C3  Yes
Power dissipation at device nominal power without braking resistor Approx. 180 W
DC bus connection
DC bus capacitance 235 µF
24 VDC power supply
Input voltage  24 VDC ±25%
Input capacitance 8200 µF
Current consumption  Max. 2.5 A + Current for motor holding brake
Motor connection
Quantity 1
Continuous current  4.4 Aeff
Reduction of continuous current depending on ambient temperature  
Mains input voltage: 400 VAC  
Switching frequency 5 kHz No reduction
Switching frequency 10 kHz No reduction
Switching frequency 20 kHz 0.13 Aeff per °C (starting at 45°C) 
Mains input voltage: 480 VAC  
Switching frequency 5 kHz No reduction
Switching frequency 10 kHz No reduction
Switching frequency 20 kHz 0.13 Aeff per °C (starting at 35°C) 
Reduction of continuous current depending on installation elevation  
Starting at 500 m above sea level 0.44 Aeff per 1000 m
Peak current 24 Aeff
Nominal switching frequency 20 kHz
Possible switching frequencies 5 / 10 / 20 kHz
Insulation stress of the connected motor per IEC TS 60034-25:2004  Limit value curve A
Max. motor line length 25 m
Protective measures  
Overload protection Yes
Short-circuit and ground fault protection Yes
Max. output frequency 598 Hz 
Terminal connection cross section  
Flexible and fine-stranded wires  
With wire end sleeves 0.25 to 4 mm²
Approbation data  
UL/C-UL-US 30 to 10 AWG
CSA 28 to 10 AWG
Motor holding brake connection
Response threshold for open-circuit monitoring Approx. 385 mA
Max. output current 1 A
Max. number of switching cycles Unlimited since implemented electronically
Braking resistor
Peak power output 7 kW
Continuous power 200 W
Limit switch and reference inputs
Quantity 3
Circuit Sink
Electrical isolation  
Input - ACOPOS Yes
Input - Input No
Input voltage  
Nominal 24 VDC
Maximum 30 VDC
Switching threshold  
Low <5 V
High >15 V
Input current at nominal voltage Approx. 4 mA
Switching delay Max. 2.0 ms
Modulation compared to ground potential Max. ±38 V
Enable inputs
Quantity 1
Circuit Sink
Electrical isolation  
Input - ACOPOS Yes
Input voltage  
Nominal 24 VDC
Maximum 30 VDC
Input current at nominal voltage Approx. 30 mA
Switching threshold  
Low <5 V
High >15 V
Switching delay  
Enable 0 → 1, ready for PWM Max. 100 µs
Enable 1 → 0, PWM off Max. 2.0 ms
Modulation compared to ground potential Max. ±38 V
OSSD signal connections  Not permitted
Trigger inputs
Quantity 2
Circuit Sink
Electrical isolation  
Input - ACOPOS Yes
Input - Input No
Input voltage  
Nominal 24 VDC
Maximum 30 VDC
Switching threshold  
Low <5 V
High >15 V
Input current at nominal voltage Approx. 10 mA
Switching delay  
Rising edge 52 µs ±0.5 µs (digitally filtered)
Falling edge 53 µs ±0.5 µs (digitally filtered)
Modulation compared to ground potential Max. ±38 V
Electrical properties
Discharge capacitance 660 nF
Energy efficiency (IE classification)   
Efficiency data IE2 (10,25) 1.7%
IE2 (50,25) 1.7%
IE2 (10,50) 1.9%
IE2 (50,50) 2%
IE2 (90,50) 2.1%
IE2 (10,100) 2.3%
IE2 (50,100) 2.5%
IE2 (90,100) 2.9%
Nominal losses in standby mode 13.2 W
Operating conditions
Permissible mounting orientations  
Hanging vertically Yes
Horizontal, face up Yes
Standing horizontally No
Installation elevation above sea level  
Nominal 0 to 500 m
Maximum  2000 m
Pollution degree per EN 61800-5-1 2 (non-conductive pollution)
Overvoltage category per EN 61800-5-1 II
Degree of protection per EN 60529 IP20
Ambient conditions
Temperature  
Operation  
Nominal 5 to 40°C
Maximum  55°C
Storage -25 to 55°C
Transport -25 to 70°C
Relative humidity  
Operation 5 to 85%
Storage 5 to 95%
Transport Max. 95% at 40°C
Mechanical properties
Dimensions  
Width 70.5 mm
Height 375 mm
Depth 235.5 mm
Weight 4.1 kg
 
Related Products
B&R ACOPOS Servo Motion Control System
B&R ACOPOS Servo Motion Control System
B&R X20 Module System I/O System STOCKS FOR SALE
B&R X20 Module System I/O System STOCKS FOR SALE
X20PS9400 B&R X20 System - in Stock China
X20PS9400 B&R X20 System - in Stock China
X20DO9322 B&R X20 System - in Stock China
X20DO9322 B&R X20 System - in Stock China