X20AI4632-1 B&R X20 Input Module - B&R Supplier in China

Products Mode:
Place of Origin: AT

Inquery Now
Description
X20AI4632-1 B&R X20 Input Module 
 
MATERIAL NUMBER:
X20AI4632-1
DESCRIPTION:
  • 4 analog inputs
  • Either current or voltage signal possible
  • Extended signal range
  • 16-bit digital converter resolution
  • Simultaneous input conversion
  • Very fast conversion time

The module is equipped with 4 inputs with 16-bit digital converter resolution. It is possible to select between the current and voltage signal using different terminals.

 

Short description
I/O module 4 analog inputs ±11 V or 0 to 22 mA
General information
B&R ID code 0xA29D
Status indicators I/O function per channel, operating state, module status
Diagnostics  
Module run/error Yes, using LED status indicator and software
Inputs Yes, using LED status indicator and software
Channel type Yes, using software
Power consumption  
Bus 0.01 W
Internal I/O 1.5 W 
Additional power dissipation caused by actuators (resistive) [W] -
Certifications  
CE Yes
UKCA Yes
ATEX Zone 2, II 3G Ex nA nC IIA T5 Gc
IP20, Ta (see X20 user's manual)
FTZÚ 09 ATEX 0083X
UL cULus E115267
Industrial control equipment
HazLoc cCSAus 244665
Process control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T5
DNV Temperature: B(0 - 55°C)
Humidity: B(up to 100%)
Vibration: B(4 g)
EMC: B(bridge and open deck)
LR ENV1
KR Yes
ABS Yes
EAC Yes
KC Yes
Analog inputs
Input ±11 V or 0 to 22 mA, via different terminal connections
Input type Differential input
Digital converter resolution  
Voltage ±15-bit
Current 15-bit
Conversion time 50 μs for all inputs
Output format INT
Output format  
Voltage INT 0x8001 - 0x7FFF / 1 LSB = 0x0001 = 335.693 µV
Current INT 0x0000 - 0x7FFF / 1 LSB = 0x0001 = 671.387 nA
Input impedance in signal range  
Voltage 20 MΩ
Current -
Load  
Voltage -
Current <400 Ω
Input protection Protection against wiring with supply voltage
Permissible input signal  
Voltage Max. ±30 V
Current Max. ±50 mA
Output of digital value during overload  
Undershoot  
Voltage 0x8001
Current 0x0000
Overshoot  
Voltage 0x7FFF
Current 0x7FFF
Conversion procedure SAR
Input filter Hardware - Third-order low-pass filter / cutoff frequency 10 kHz
Max. error  
Voltage  
Gain 0.08% 
Offset 0.01% 
Current  
Gain 0.08% 
Offset 0.02% 
Max. gain drift  
Voltage 0.01%/°C 
Current 0.01%/°C 
Max. offset drift  
Voltage 0.001%/°C 
Current 0.002%/°C 
Common-mode rejection  
DC 70 dB
50 Hz 70 dB
Common-mode range ±12 V
Crosstalk between channels <-70 dB
Nonlinearity  
Voltage <0.01% 
Current <0.015% 
Insulation voltage between channel and bus 500 Veff
Electrical properties
Electrical isolation Channel isolated from bus
Channel not isolated from channel
Operating conditions
Mounting orientation  
Horizontal Yes
Vertical Yes
Installation elevation above sea level  
0 to 2000 m No limitation
>2000 m Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529 IP20
Ambient conditions
Temperature  
Operation  
Horizontal mounting orientation -25 to 60°C
Vertical mounting orientation -25 to 50°C
Derating See section "Derating".
Storage -40 to 85°C
Transport -40 to 85°C
Relative humidity  
Operation 5 to 95%, non-condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical properties
Note Order 1x terminal block X20TB12 separately.
Order 1x bus module X20BM11 separately.
Pitch 12.5+0.2mm