X20AT6402 X20 Input Module - B&R Supplier in China

Products Mode: X20AT6402

Place of Origin: AT

Inquery Now

Prev Next

Description

X20AT6402 X20 Input Module

MATERIAL NUMBER:

X20AT6402

DESCRIPTION:

6 inputs for thermocouples
For sensor types J, K, N, S, B, R
Additional direct raw value measurement
Integrated terminal temperature compensation
Configurable filter time

The module is equipped with 6 inputs for J, K, N, S, B and R thermocouple sensors. The module has an integrated terminal temperature compensation.

Short description

I/O module	6 inputs for thermocouples

General information

B&R ID code	0x1BA9
Status indicators	I/O function per channel, operating state, module status
Diagnostics
Module run/error	Yes, using LED status indicator and software
Inputs	Yes, using LED status indicator and software
Power consumption
Bus	0.01 W
Internal I/O	0.91 W
Additional power dissipation caused by actuators (resistive) [W]	-
Certifications
CE	Yes
UKCA	Yes
ATEX	Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual) FTZÚ 09 ATEX 0083X
UL	cULus E115267 Industrial control equipment
HazLoc	cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5
DNV	Temperature: B(0 - 55°C) Humidity: B(up to 100%) Vibration: B(4 g) EMC: B(bridge and open deck)
LR	ENV1
KR	Yes
ABS	Yes
EAC	Yes
KC	Yes

Thermocouple temperature inputs

Input	Thermocouple
Digital converter resolution	16-bit
Filter time	Configurable between 1 ms and 66.7 ms
Conversion time
1 channel	80.4 ms with 50 Hz filter
N channels	(n + 1) x 40.2 ms with 50 Hz filter
Output format	INT
Measurement range
Sensor temperature
Type J: Fe-CuNi	-210 to 1200°C
Type K: NiCr-Ni	-270 to 1372°C
Type N: NiCrSi-NiSi	-270 to 1300°C (Rev. ≥D0)
Type S: PtRh10-Pt	-50 to 1768°C
Type B: PtRh30-PtRh6	0 to 1820°C
Type R: PtRh13-Pt	-50 to 1664°C
Terminal temperature	-25 to 85°C
Raw value	±65.534 mV
Terminal temperature compensation	Internal
Sensor standard	EN 60584
Resolution
Sensor temperature	1 LSB = 0.1°C
Terminal temperature	1 LSB = 0.1°C
Raw value output with respect to gain	1 LSB = 1 µV or 2 µV
Normalization
Type J: Fe-CuNi	-210.0 to 1200.0°C
Type K: NiCr-Ni	-270.0 to 1372.0°C
Type N (Rev. ≥D0)	-270.0 to 1300.0°C
Type S: PtRh10-Pt	-50.0 to 1768.0°C
Type B: PtRh30-PtRh6	0 to 1820.0°C
Type R: PtRh13-Pt	-50.0 to 1664.0°C
Terminal temperature	-25.0 to 85.0°C
Monitoring
Range undershoot	0x8001
Range overshoot	0x7FFF
Open circuit	0x7FFF
Open inputs	0x7FFF
General fault	0x8000
Conversion procedure	Sigma-delta
Linearization method	Internal
Permissible input signal	Max. ±5 V
Input filter	First-order low-pass filter / cutoff frequency 500 Hz
Max. error at 25°C
Gain	0.06%
Offset
Type T: Cu-CuNi	0.04%
Type K: NiCr-Ni	0.05%
Type N (Rev. ≥D0)	0.05%
Type S: PtRh10-Pt	0.11%
Type B: PtRh30-PtRh6	0.13%
Type R: PtRh13-Pt	0.09%
Max. gain drift	0.01%/°C
Max. offset drift
Type J: Fe-CuNi	0.0019 %/°C
Type K: NiCr-Ni	0.0024% / °C
Type N (Rev. ≥D0)	0.0029 %/°C
Type S: PtRh10-Pt	0.0079 %/°C
Type B: PtRh30-PtRh6	0.0114 %/°C
Type R: PtRh13-Pt	0.0074 %/°C
Nonlinearity	±0.001%
Common-mode rejection
DC	>70 dB
50 Hz	>70 dB
Common-mode range	±15 V
Crosstalk between channels	<-70 dB
Insulation voltage
Between channel and bus	500 V_eff
Terminal temperature compensation precision
With artificial convection	±4°C after 10 min
With natural convection	±2°C after 10 min

Electrical properties

Electrical isolation	Channel isolated from bus Channel not isolated from channel

Operating conditions

Mounting orientation
Horizontal	Yes
Vertical	Yes
Installation elevation above sea level
0 to 2000 m	No limitation
>2000 m	Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529	IP20

Ambient conditions

Temperature
Operation
Horizontal mounting orientation	0 to 55°C
Vertical mounting orientation	0 to 50°C
Derating	-
Storage	-40 to 85°C
Transport	-40 to 85°C
Relative humidity
Operation	5 to 95%, non-condensing
Storage	5 to 95%, non-condensing
Transport	5 to 95%, non-condensing