8BAC0120.001-2 EnDat 2.2 encoder interface - B&R ACOPOS

Products Mode: 8BAC0120.001-2
Place of Origin: AT

Inquery Now
8BAC0120.001-2 EnDat 2.2 encoder interface - B&R ACOPOS
  • EnDat 2.2 encoder interface for installation in ACOPOSmulti modules
  • Encoder monitoring
  • Embedded parameter chip when used with B&R motors
ACOPOSmulti plug-in module, EnDat 2.2 interface
General information
Module type ACOPOSmulti plug-in module
B&R ID code 0xB0BF
Slot  Slots 1 and 2
Max. power consumption PModule [mW] = 500 mW + 19 V * IEncoder [mA] 
CE Yes
UL cULus E225616
Power conversion equipment
KC Yes
Encoder connection 
Module-side connection 9-pin male DSUB connector
Status indicators UP/DN LEDs
Electrical isolation  
Encoder - ACOPOSmulti No
Encoder monitoring Yes
Max. encoder cable length 100 m
Depends on the cross section of the power supply wires of the encoder cable 
Encoder power supply
Output voltage Typ. 12.5 V
Load capacity 350 mA
Protective measures  
Overload-proof Yes
Short-circuit proof Yes
Synchronous serial interface
Signal transmission RS485
Baud rate 6.25 Mbit/s
Ambient conditions
Nominal 5 to 40°C
Maximum 55°C
Storage -25 to 55°C
Transport -25 to 70°C
Relative humidity  
Operation 5 to 85%
Storage 5 to 95%
Transport Max. 95% at 40°C