X20BB80 X20 Bus Base - B&R Supplier in China

Products Mode: X20BB80
Place of Origin: AT

Inquery Now
Description
X20BB80 X20 Bus Base 
 
MATERIAL NUMBER:
X20BB80
DESCRIPTION:
  • Bus base

The following modules are used on the bus module:

  • Base module (BC, HB, etc.)
  • Supply module

The left and right end cover plates are included in delivery.

 

Short description
Bus module Bus base - Backplane for bus controller fieldbus interface and bus controller power supply module
General information
Power consumption  
Bus 0.25 W
Internal I/O -
Additional power dissipation caused by actuators (resistive) [W] -
Certifications  
CE Yes
UKCA Yes
ATEX Zone 2, II 3G Ex nA nC IIA T5 Gc
IP20, Ta (see X20 user's manual)
FTZÚ 09 ATEX 0083X
UL cULus E115267
Industrial control equipment
HazLoc cCSAus 244665
Process control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T5
DNV Temperature: B(0 - 55°C)
Humidity: B(up to 100%)
Vibration: B(4 g)
EMC: B(bridge and open deck)
LR ENV1
KR Yes
ABS Yes
EAC Yes
KC Yes
I/O power supply
Nominal voltage 24 VDC
Permissible contact load 10 A
Operating conditions
Mounting orientation  
Horizontal Yes
Vertical Yes
Installation elevation above sea level  
0 to 2000 m No limitation
>2000 m Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529 IP20
Ambient conditions
Temperature  
Operation  
Horizontal mounting orientation -25 to 60°C
Vertical mounting orientation -25 to 50°C
Derating -
Storage -40 to 85°C
Transport -40 to 85°C
Relative humidity  
Operation 5 to 95%, non-condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical properties
Note Left and right X20 end cover plates included in delivery
Pitch 37.5+0.2mm