8AC122.60-3 ACOPOS Plug-in Modules - B&R Supplier in China

Products Mode: 8AC122.60-3
Place of Origin: AT

Inquery Now
8AC122.60-3 ACOPOS Plug-in Modules
  • Resolver interface for installation in ACOPOS servo drives
  • Monitors encoder input signals
  • Resolver type BRX
ACOPOS plug-in module, resolver interface 10 kHz
General information
Module type ACOPOS plug-in module
B&R ID code 0xA48B
Slot  Slots 2, 3 and 4
Max. cable length 100 m
Power consumption Max. 2.5 W
CE Yes
UL cULus E225616
Power conversion equipment
KC Yes
Resolver inputs
Reference output  
Output current Max. 50 mAeff
Differential voltage Typ. 3.4 Veff
Frequency 10 kHz
Signal transmission Differential signals
Angular position resolution 14 bits/rev 
Module-side connection 9-pin female DSUB connector
Status indicators UP/DN LEDs
Bandwidth 2.5 kHz
Encoder monitoring Yes
Accuracy ±8 angular minutes
Electrical isolation  
Resolver - ACOPOS No
Input frequency 10 kHz
Input voltage 3 to 7 Vrms
Number of pins 2-pin
Type BRX 
Max. phase shift ±45°
Max. elec. angular error ±10 angular minutes
Nominal transformation ratio  0.5 ±10%
Sine/Cosine inputs  
Input impedance at 10 kHz (per pin) 10.4 kΩ - j 11.1 kΩ
Signal transmission Differential signals
Encoder-ACOPOS electrical isolation No, common-mode voltage on the sine-cosine inputs max ± 20 V
Ambient conditions
Nominal 5 to 40°C
Maximum 55°C
Storage -25 to 55°C
Transport -25 to 70°C
Relative humidity  
Operation 5 to 85%
Storage 5 to 95%
Transport Max. 95% at 40°C