Rexroth Directional Control valve 4WRPEH

Products Mode: 4WRPEH6C3B12L-3X/M/24A1

Inquery Now
  4WRPEH directional control valves list Download
  Rexroth 4/4 directional control valves, direct operated, with electrical position feedback and integrated electronics 4WRPEH Download
Directional Control valve 4WRPEH
Reliable - proven and robust design
▶ Safe - fail-safe position of the control spool in switched-off condition
▶ Energy-efficient - no pilot oil demand
▶ High quality - control spool and sleeve in servo quality
▶ Flexible - suitable for position, velocity, and pressure control
▶ Precise - high response sensitivity and little hysteresis

The Rexroth 4WRPEH is a proportional directional valve that is used in hydraulic systems to control the direction and flow of fluid. Here are some of the key parameters and specifications for this valve:

  1. Maximum flow rate: The maximum flow rate of the 4WRPEH valve is 80 liters per minute (L/min).
  2. Maximum pressure: The maximum pressure rating for the valve is 350 bar.
  3. Control voltage: The valve operates on a control voltage of 24 volts DC.
  4. Spool type: The 4WRPEH valve uses a proportional spool to control the flow of fluid.
  5. Electrical interface: The valve has an integrated digital electronics module (OBE) that is compatible with a wide range of fieldbus interfaces, including CANopen, Profibus DP, and EtherCAT.
  6. Operating temperature: The valve can operate at temperatures ranging from -30°C to +60°C.
  7. Mounting style: The valve can be mounted in any position, but is typically mounted on a manifold using standard DIN 24340 mounting holes.
  8. Feedback signal: The valve provides a feedback signal that can be used for closed-loop control of the system.
  9. Response time: The valve has a fast response time of less than 20 ms.
  10. Leakage rate: The valve has a low leakage rate of less than 5 cm3/min.

The cost of a Rexroth 4WRPEH valve can vary depending on several factors, such as the specific model, configuration, and supplier. Other factors that may affect the cost of the valve include the quantity ordered, the delivery time, and any additional accessories or components that are required.


Parameter Value
Maximum pressure 500 bar (7250 psi)
Maximum flow Depends on valve size and pressure drop, calculated as needed
Valve size Various sizes available, selected based on flow and pressure drop requirements
Operating temperature Maximum of +60°C (+140°F)
Control options Manual, hydraulic, electrical, and electronic control options available
Seal material Various materials available, selected based on medium and operating conditions